User's Manual Part 2

Quantum 1000 Base Station User
Figure 62
-
7)
Hit the <ESC> to return to the
“Save” any changes.
8) Select #3 (
ADVANCED CONFIGURATION
verify the following two settings (figure
•
Auto Default Provisioning
• Auto Start
is set for 1 (enabled)
If these variables are not set as expected then select the relevant option and change these
enabled state.
Quantum 1000 Base Station User
Guide
Rev 1.1, Page
-
Base Station CLI IP Wireless Protocol Check
Hit the <ESC> to return to the
1.1 BASIC CONFIGURATION
menu. You will be prompted to
ADVANCED CONFIGURATION
) from the
1.1 BASIC CONFIGURATION
verify the following two settings (figure
63).
Auto Default Provisioning
is set for 1 (enabled)
is set for 1 (enabled)
If these variables are not set as expected then select the relevant option and change these
Rev 1.1, Page
55 of 70
menu. You will be prompted to
1.1 BASIC CONFIGURATION
menu and
If these variables are not set as expected then select the relevant option and change these
to the