User's Manual

Quantum 1000 Base Station User
4)
Take the pole clamp section with the bolt hole and secure to the U
washer (figure 26
). Secure a pole clamp section to each U
Figure
5)
Depending on the intended angle of elevation and degree of down/up tilt will determine whether
to lock one end and have flexibility on the other. This is the intent of the slots. Figure 2
downtilting antenna and therefore the
upper bracket.
Figure
Quantum 1000 Base Station User
Guide
Rev 1.1, Page
Take the pole clamp section with the bolt hole and secure to the U
-
Bracket using the bolt and lock
). Secure a pole clamp section to each U
-Bracket.
Figure
26 – Pole Clamp half section
Depending on the intended angle of elevation and degree of down/up tilt will determine whether
to lock one end and have flexibility on the other. This is the intent of the slots. Figure 2
downtilting antenna and therefore the
bottom bracket is ”fixed” and movement is allowed in the
Figure
27 – Pole Clamp to U-bracket
Rev 1.1, Page
28 of 70
Bracket using the bolt and lock
Depending on the intended angle of elevation and degree of down/up tilt will determine whether
to lock one end and have flexibility on the other. This is the intent of the slots. Figure 2
7 is for a
bottom bracket is ”fixed” and movement is allowed in the