User's Manual

2.3.3 Capacity and Performance Characteristics
Table 7 summarizes key upper layer and overall performance characteristics of PureWave
Quantum base stations. Note that some features may not be currently available, but are
planned for future software releases. In addition, detailed throughput tables for each DL:UL
ratios is presented in Appendix B.
Parameter Specification
Active Users 256
Service Flows Per User 16
Idle-Mode Users 2048
Peak Throughput
Aggregate: Up to 50Mbps
DL: Up to 43Mbps
UL: Up to 20Mbps
QoS BE, UGS, rtPS, ErtPS, nrtPS
Convergence Sublayer
IP-CS, Eth-CS, PHS*, IPv4, IPv6*, IPv6 Pass-Through
(*Future)
Security AES-128, EAP-TLS, EAP-TTLS, PKMv2
Management
PureView NMS / EMS, Remote CLI, Web Interface, SNMP
v2c, SNMPv3
Core Network Interface R6 (NWG 1.2.2, NWG 1.3.1), Radius
Table 7: Performance Characteristics
2.3.4 Electro-Mechanical and Environmental Specifications
All PureWave Quantum Family Base Stations consist of a single, all-in-one, fully weatherproof
unit that may be installed entirely outdoors (or indoors, as a deployment dictates). Please refer
to the PureWave Quantum Base Station Installation Manual for detailed installation
instructions and guidelines.
Table 2 lists the mechanical, electrical, and environmental properties of the PureWave
Quantum 22XX, 44XX, and 66XX Base Stations.
Parameter Specification
Dimensions 17.5” (H) x 16.7” (W) x 5.3” (D)
44cm (H) x 42cm (W) x 13cm (D)
Weight Base Station: 32 pounds (14.5kg)
Mounting Bracket: XX pounds (xxkg)
Power -48VDC or 110/220 VAC, 180 Watts Max
Temperature -45 to +55 degrees C (ETSI EN 300 019-1.4 Class 4.1E)