User's Guide

Quantum 2200 Installation Guide v2.1
Page 37
Figure 29: Use insertion tool to secure the pins in the plug.
Figure 30: Front view of plug with crimp pins properly inserted
Step 9:
Complete the assembly by screwing the plug into the circular socket connector and secure
with the cable clamp by tightening the two strain-relief screws using a Phillips screwdriver.
The completed assembly is shown in Figure 31.
Figure 31: Completed Power Connector Assembly
Note that the base station does not have a power switch and will immediately power up if
the DC power connector is in place and power is applied. Please do not apply power to the
base station until all connections are made in accordance with the instructions in this guide.
Then, please refer to the PureWave Quantum Base Station User Guide for additional
instructions.