Assembly instructions Instructions d’assemblage We’re here to help - Do not return this product ! . . . If you need help with assembly If you received a damaged or defective part If you are missing hardware Nous sommes là pour vous - Ne retournez pas ce produit ! Appelez, écrivez ou trouvez-nous en ligne d’abord ! . . .
Read these assembly instructions carefully before beginning. Verify that you have in hands all the wood parts and hardware. Keep this document for future reference. Lisez attentivement ce guide d’assemblage avant de débuter. Assurez vous que toutes les composantes de bois et de quincaillerie sont présentes. Conservez ce document. Two people are required to assemble and move this unit. Deux personnes sont requises pour assembler et déplacer ce meuble.
Hardware list Liste de quincaillerie Metal frame with wood slats Cadre de métal avec lattes de bois 30x # 2214 15x # 2213 2x # 2212 4x # 2211 4x # 2219 3
Hardware List Liste de Quincaillerie 18x 18x 10x # 0203 # 0110 # 0111 24x 8x 6x # 2200 # 1119 # 0204 20x 20x # 0207 # 0199 18x # 0105 16x 1x kit # 2191 DL CL 3x black noir For drawers Pour tiroirs CR DR # 2215 1x # 2300 set of 4 ensemble de 4 3x # 2195 # 0911 U U Footboard Pied de lit Page 5 Footboard Pied de lit Page 12 4
1 Using the 18 screws # 0110, fasten the 6 drawer slides # 0911 (CL and CR) to the panels M, T and U Utilisez les 18 vis # 0110 pour installer les 6 coulisses # 0911 (CL et CR) sur les 4 panneaux M, T et U Cette vis en premier # 0911 6x # 0110 CL 18x # 0110 CL or ou CR CR U CL T CL M CR M FLIP M RETOURNEZ M CL CR M M Add a protection under the parts on all assembly steps Ajoutez une protection sous les pièces à chaque étape 5
2 Insert the 18 cam locks # 0203 into the panels E, G, H, M and R. Then, insert 8 wood dowels # 0207 into the panels E and M Insérez les 18 excentriques # 0203 dans les panneaux E, G, H, M et R.
4 Use a hammer to fasten the 8 tack glides # 1119 to the panels M, T and U Utilisez un marteau pour installer les 8 patins cloutés # 1119 sur les panneaux M, T et U 8x # 1119 U T M M 5 Use the Allen key # 2300 and the 20 screws # 0199 to fasten the 2 slat supports # 2212 to the panels G and H. Do not overtighten the screws Utilisez la clé # 2300 et les 20 vis # 0199 pour installer les 2 supports de lattes # 2212 sur les panneaux G et H.
6 Fasten the 2 panels E to the 2 panels M. Then, tighten the 2 cam locks # 0203 located on both panels E Assemblez les 2 panneaux E avec les 2 panneaux M.
8 Fasten the panel H to the pre-assembled unit. Then, tighten the 2 cam locks # 0203 located on both panels M Assemblez le panneau H avec l’unité pré-assemblée.
9 Fasten the pre-assembled panels E-E-H-M-M-R and the panel G to the panel T. Then, tighten the 7 cam locks # 0203 located on the panels E, G, H and R Assemblez les panneaux pré-assemblés E-E-H-M-M-R et le panneau G avec le panneau T. Serrez ensuite les 7 excencentriques # 0203 se trouvant sur les panneaux E, G, H et R 7x 2 T G R M E H M IMPORTANT Turn clockwise 2/3 of a turn Tournez vers la droite 2/3 de tour et serrez fermement E 10 Fasten the panel U to the pre-assembled unit.
Use the 16 screws # 2215 to fasten the 4 brackets # 2211 to the 4 corners of the bed frame.
1 Using the 18 screws # 0110, fasten the 6 drawer slides # 0911 (CL and CR) to the panels M, T and U Utilisez les 18 vis # 0110 pour installer les 6 coulisses # 0911 (CL et CR) sur les 4 panneaux M, T et U Cette vis en premier # 0911 6x # 0110 CL 18x # 0110 CL or ou CR CR U T CL CL M CR M FLIP M RETOURNEZ M CL CR M M Add a protection under the parts on all assembly steps Ajoutez une protection sous les pièces à chaque étape 12
2 Insert the 18 cam locks # 0203 into the panels E, G, H, M and R. Then, insert 8 wood dowels # 0207 into the panels E and M Insérez les 18 excentriques # 0203 dans les panneaux E, G, H, M et R.
4 Use a hammer to fasten the 8 tack glides # 1119 to the panels M, T and U Utilisez un marteau pour installer les 8 patins cloutés # 1119 sur les panneaux M, T et U 8x # 1119 U T M M 5 Use the Allen key # 2300 and the 20 screws # 0199 to fasten the 2 slat supports # 2212 to the panels G and H. Do not overtighten the screws Utilisez la clé # 2300 et les 20 vis # 0199 pour installer les 2 supports de lattes # 2212 sur les panneaux G et H.
6 Fasten the 2 panels E to the 2 panels M. Then, tighten the 2 cam locks # 0203 located on both panels E Assemblez les 2 panneaux E avec les 2 panneaux M.
8 Fasten the panel H to the pre-assembled unit. Then, tighten the 2 cam locks # 0203 located on both panels M Assemblez le panneau H avec l’unité pré-assemblée.
9 Fasten the pre-assembled panels E-E-H-M-M-R and the panel G to the panel T. Then, tighten the 7 cam locks # 0203 located on the panels E, G, H and R Assemblez les panneaux pré-assemblés E-E-H-M-M-R et le panneau G avec le panneau T. Serrez ensuite les 7 excencentriques # 0203 se trouvant sur les panneaux E, G, H et R 7x T 2 G R M E H IMPORTANT M Turn clockwise 2/3 of a turn Tournez vers la droite 2/3 de tour et serrez fermement E 10 Fasten the panel U to the pre-assembled unit.
11 Use the 16 screws # 2215 to fasten the 4 brackets # 2211 to the 4 corners of the bed frame.
12 Insert 2 plastic end caps # 2214 to each end of the 15 wood slats # 2213. Each end cap # 2214 should be fully inserted to the end Insérez 2 embouts de plastique # 2214 aux 2 extrémités des 15 lattes de merisier # 2213. Chaque embout # 2214 doit être inséré jusqu’au fond 15x # 2213 # 2214 13 30x # 2214 Insert each end of the 15 wood slats # 2213 into the holes located on the top side of the 2 slat supports # 2212.
14 Install 2 corner bumpers # 2191 on the 2 upper corners of the panel U. Peel and apply 4 small double face stickers on each bumper Installez 2 pare-chocs de coins # 2191 aux 2 extrémités supérieures du panneau U.
3x 15 V Y X W Install 2 small cam locks # 0204 on panels V and W. Install 2 push bolts # 2200 on the drawer front X. Install 4 wood dowels # 0207 on panels V, W and Y Installez 2 mini excentriques # 0204 dans les panneaux V et W. Installez 2 boulons # 2200 sur la façade X.
17 Insert the drawer bottom into the grooves located on panels V and W Insérez le fond de tiroir dans les 2 rainures des panneaux V et W Unfolded Déplié drawer bottom fond de tiroir V 18 Drawer bottom must enter into the groove located on panel X Le fond de tiroir doit entrer dans la rainure se trouvant sur le panneau X W X Fasten the panel Y to both panels V and W. Align the 2 wood dowels # 0207 with the holes close to the grooves.