Outdoor Wicker Sofa
PART LIST A B Arm Panel 2 PCS Back Panel 1 PC G F Core of Seat Cushion 3 PCS Seat Panel 1 PC H Cover of Back Cushion * 3 PCS E D C Lower Front 1 PC Cover of Seat Cushion * 3 PCS *Please note cushion covers will ship separately.
EXTRA HARDWARE LIST #1 #2 #3 #4 #5 M6*30mm M6*40mm M6*50mm M6mm M6mm Short Bolt 1 PC Medium Bo lt 1 PC Long Bo lt 3 PCS Nut 3 PCS Washer 3 PCS #8 M6mm Adjustable Leveler 2 PCS 3
Step 1. Lay arm panel (part A) down on a soft flat surface,such as carpet,as shown below.Attach back panel (part B) to arm panel (part A) using medium bolts (part #2),washers (part #5),nuts (part #4),wrench (part #6) and allen key key (part #7). NOTE: Please do not fully tighten bolts until unit is fully assembled. #7 #2 #5 B #5 #4 #6 A #2 #4 #5 X2 X2 X4 Step 2.
Step 3. Attach lower front (part D) to arm panel (part A) and seat panel (part C) using short bolts (part #1),long bolts (part #3),washers (part #5),nuts (part #4), wrench (part #6) and allen key (part #7). NOTE: Please do not fully tighten bolts until unit is fully assembled. #7 #1 #7 #5 D C B #3 #5 A #5 #4 #6 #1 X3 #3 #4 #5 X2 X2 X7 Step 4.
Step 5. Screw adjustable levelers (part #8) to desired position in the pre-drilled holes on the bottom of the sofa where shown. Step 6. Insert core of seat cushion (part F) into cover of seat cushion (part E). Insert core of back cushion (part H) into cover of back cushion (part G).
Step 7. Carefully turn the assembled sofa upright and add cushions as shown below.
