Assembly Instructions

GLASS PENDANT LAMP
A
REMOVE ALL PARTS FROM PACKAGE, BE CAREFUL NOT TO DAMAGE ANY COMPONENTS.
Measure area and determine desired hanging height.
1.
Detach mounting plate [C] from canopy [D].
3.
Adjust the length of the cord by loosening the screw on
the stem of the canopy with the provided screwdriver [A].
Re-tighten screw after desired cord length is achieved.
2.
installation by a qualified electrical professional. Canopy
nuts [E] are used to tighten light to ceiling.
5.
Install the glass shade [F] onto socket part [B] and tighten
Note: Turn off switch before replacing the bulb. Make sure the bulb has sufficient time to cool down.
Do not subject the lamp to any shock while lit as shattering of glass shade may result.
F
C
D
B
B
E
C
D
F
G
E
x2
G
x3
A
D
Install light to ceiling. We recommend
4.
Mounting plate [C] will attach to ceiling junction box.
6.
by using glass screws [G]. Install bulb 60W max.