Assembly Instructions

A
REMOVE ALL PARTS FROM PACKAGE, BE CAREFUL NOT TO DAMAGE ANY COMPONENTS.
Measure area and determine desired hanging height.
1.
Detach mounting plate [C] from canopy [D].
3.
Adjust the length of the cord by loosening the screw on
the stem of the canopy [D] with the provided screwdriver
[A]. Re-tighten screw after desired cord length is
achieved.
2.
Mounting plate [C] will attach to ceiling junction box.
4.
5.
Remove socket cover screws [G] from socket cover [H].
6.
8.
Install included bulb. Slide s
ocket [B] into glass shade
[F]. Metal socket top will be inside glass shade [F].
Lower socket cover [H] over top of glass shade [F].
Tighten by using socket cover screws [G].
7.
Note: Turn off switch before replacing the bulb. Make sure the bulb has sufficient time to cool down.
Do not subject the lamp to any shock while lit as shattering of glass shade may result.
F
C
D
B
H
B
H
E
C
D
F
G
E
x2
G
x2
A
B
F
D
GLASS PENDANT LAMP
Install light to ceiling. We recommend installation by a
qualified electrical professional. Canopy nuts [E] are
used to tighten light to ceiling.