Assembly & Mounting Instructions

TABLE LAMP

ASSEMBLY AND MOUNTING INSTRUCTIONS

GENERAL

•

WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC

POWER OFF BEFORE INSTALLING, CLEANING, OR OTHER

MAINTENANCE.

•

FAILURE TO INSTALL FIXTURE CORRECTLY COULD RESULT

IN SERIOUS INJURY OR DEATH

•

READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION.

•

BEFORE DISCARDING THE CARTON DOUBLE CHECK THE

PACKAGING TO MAKE SURE ALL PARTS HAVE BEEN FOUND.

INSTALLATION

STEP 1. Remove the table lamp and parts from the Carton.

STEP 2. Place shade over socket fitter and secure with socket

ring.

STEP 3. Install the Lamp/Bulb. This fixture is rated for 60 watt A19

lamp.

DO NOT EXCEED RECOMMENDED WATTAGE

STEP 4. Plug cord into a qualified socket of properly rated

voltage.

STEP 5. On/Off Dimmer installed on cord or fixture.

CLEANING

Please clean with a soft, dry cloth ONLY! Do not use cleaning products

ASSEMBLY AND MOUNTING DIAGRAM

DIMMER SWITCH

PLUG

SOCKET FITTER

SHADE

SOCKET RING

LAMP

PAGE 1
TABLE LAMP ASSEMBLY AND MOUNTING INSTRUCTIONS GENERAL • • WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC POWER OFF BEFORE INSTALLING, CLEANING, OR OTHER MAINTENANCE. • READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION. • BEFORE DISCARDING THE CARTON DOUBLE CHECK THE PACKAGING TO MAKE SURE ALL PARTS HAVE BEEN FOUND. FAILURE TO INSTALL FIXTURE CORRECTLY COULD RESULT IN SERIOUS INJURY OR DEATH INSTALLATION STEP 1. STEP 2. STEP 3. Remove the table lamp and parts from the Carton.
PAGE 2
TABLE LAMP NOTICE D'ASSEMBLAGE ET DE MONTAGE GENERALITÉ • • AVERTISSEMENT – TOUJOURS DÉBRANCHER LA LAMPE À LA PRISE AFIN DE COUPER INTÉGRALEMENT LE CIRCUIT ÉLÉCTRIQUE AVANT D’INSTALLER, DE NETTOYER OU D’ENTREPRENDRE TOUT AUTRE ENTRETIEN. UNE INSTALLATION INCORRECTE DU DISPOSITIF PEUT ENTRAINER DES BLESSURES GRAVES OU LA MORT. • VEUILLEZ LIRE TOUTE LA NOTICE AVANT DE PROCÉDER À L'INSTALLATION.