Caution : You must read this before you proceed Ottoman Label Description QTY A9 Seat Panel 1 B9 Leg with Preinstalled Leveler 2 K Seat Cushion 1 L Picture Anti-Slip Mat 1 Page 1 OF 5
Label Picture Description QTY ① Bolt (M6*30MM) 5 ② Bolt (M6*25MM) 5 ③ Allen Key 1 Before Beginnin g Assembly : *5 *5 Overview Seat Cushion(K) Seat Panel(A9) Leg(B9) FRONT FACING This Ottoman has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Ottoman parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Step 1.1 Step 1.2 Step 1.3 Open the carton and place all the parts onto a clean, non-marring surface. 1.1) Insert Seat Panel(A9) into Leg(B9) as shown above 1.2) Attach Seat Panel(A9) to Leg(B9) using Bolts(①) with Allen Key(③) as shown above. 1.3) Attach Seat Panel(A9) to Leg(B9) using Bolts(②) with Allen Key(③) as shown above. Tighten the Bolts fully in a sequential manner. Step 2 Step 2.1 Step 2.2 Step 2.3 2.1) Insert Seat Panel(A9) into Leg(B9) as shown above 2.
Step 3 Then, with the assistance from an adult partner, stand the Ottoman upright. Adjust the Pre-installed Levellers until the Ottoman is level with the ground. To adjust the Levellers, with assistance from an adult partner, tilt the Ottoman to rest on two feet. Adjust the levellers to the desired height until the Ottoman is level. Step 4 Step4.1 Step4.2 Step4.1 Place the Anti-Slip Mat(L) on the Ottoman. Step4.2 Place the Seat Cushion(K) on the Ottoman. Step 5 Your Ottoman is ready for use.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.
Caution : You must read this before you proceed Table Label Description QTY A8 Table Top 1 B8 Leg with Preinstalled Leveler 2 Description QTY ① Bolt (M6*30MM) 5 ② Bolt (M6*25MM) 5 ③ Allen Key 1 Label Picture Picture Page 1 OF 4
Before Beginnin g Assembly *5 *5 Overview Table Top(A8) Leg(B8) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Step 1.1 Step 1.2 Step 1.3 Open the carton and place all the parts onto a clean, non-marring surface. 1.
Step 2 Step 2.1 Step 2.2 Step 2.3 2.1) Align Table Top(A8) to Leg(B8) as shown above. 2.2) Attach Table Top(A8) to Leg(B8) using Bolts(①) with Allen Key(③) as shown above. 2.3) Attach Table Top(A8) to Leg(B8) using Bolts(②) with Allen Key(③) as shown above. Tighten the Bolts fully in a sequential manner. Step 3 Then, with the assistance from an adult partner, stand the Table upright. Adjust the Pre-installed Levellers until the Table is level with the ground.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.
Caution : You must read this before you proceed Armless Chair Label Picture Description QTY A3 Seat 1 B3 Right Leg(with Pre-installed Leveler) 1 C3 Left Leg(with Preinstalled Leveler) 1 D Seat Cushion 1 E Back Cushion 1 Page 1 OF 5
Label Picture Description QTY ① Bolt (M6*40MM) 7 ② Washer 7 ③ Allen Key 1 Before Beginnin g Assembly : Overview Seat Cushion(D) *7 *7 Back Cushion(E) Seat(A3) Right Leg(B3) Left Leg(C3) FRONT FACING This Armless Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Armless Chair parts, the above picture is to help you put the various parts into perspective.
Step 1 Step 1.1 Step 1.2 Open the carton and place all the parts onto a clean, non-marring surface. Place the Right Leg(B3) facedown as shown above. 1.1) Align Seat(A3) to Right Leg(B3) as shown above. 1.2) Attach Seat(A3) to Right Leg(B3) using Bolts(①) and Washers(②) with Allen Key(③) as shown above Tighten the Bolts fully in a sequential manner. Step 2 Step 2.1 Step 2.2 2.1) Align Seat(A3) to Left Leg(C3) as shown above. 2.
Step 3 Then, with the assistance from an adult partner, stand the Chair upright. Adjust the Pre-installed Levellers until the Chair is level with the ground. To adjust the Levellers, with assistance from an adult partner, tilt the Chair to rest on two feet. Adjust the levellers to the desired height until the Chair is level. Step 4 Place the Seat Cushion(D) on the Seat(A3). Tie the rope to the Seat(A3). Step 5 E Place the Back Cushion(E) on the Armless Chair. Your Armless Chair is ready for use.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.
Caution : You must read this before you proceed Left Armchair Label Picture Description QTY A2 Seat 1 B2 Right Leg(with Pre-installed Leveler) 1 C2 Left Armrest/Leg(with Pre-installed Leveler) 1 D Seat Cushion 1 E Back Cushion 1 Page 1 OF 5
Label Picture Description QTY ① Bolt (M6*40MM) 6 ② Bolt (M6*32MM) 2 ③ Washer 8 ④ Allen Key 1 Before Beginnin g Assembly : *6 *2 *8 Overview Left Armrest/Leg(C2) Back Cushion(E) Right Leg(B2) Seat(A2) Seat Cushion(D) FRONT FACING This Left Armchair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Left Armchair parts, the above picture is to help you put the various parts into perspective.
Step 1 Step 1.1 Step 1.2 Open the carton and place all the parts onto a clean, non-marring surface. Place the Left Armrest/Leg(C2) facedown. 1.1) Align Seat(A2) to Left Armrest/Leg(C2) as shown above. 1.2) Attach Seat(A2) to Left Armrest/Leg(C2) using Bolts(①), and Washers(③) with Allen Key(④) as shown above. Attach Seat(A2) to Left Armrest/Leg(C2) using Bolt(②), and Washer(③) with Allen Key(④) as shown above. Tighten the Bolts fully in a sequential manner. Step 2 Step 2.2 Step 2.1 2.
Step 3 Then, with the assistance from an adult partner, stand the Chair upright. Adjust the Pre-installed Levellers until the Chair is level with the ground. To adjust the Levellers, with assistance from an adult partner, tilt the Chair to rest on two feet. Adjust the levellers to the desired height until the Chair is level. Step 4 Place the Seat Cushion(D) on the Seat(A2). Tie the rope to the Seat(A2). Step 5 Place the Back Cushion(E) on the Left Armchair. Your Left Armchair is ready for use.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.
