Assembly Instructions

Step 2
Step 3
Then, with the assistance from an adult partner, stand the Table upright.
Adjust the Pre-installed Levellers until the Table is level with the ground.
To adjust the Levellers, with assistance from an adult partner, tilt the Table to rest on two
feet.
Adjust the levellers to the desired height until the Table is level.
Step 4
Your Table is ready for use.
This Table can only be used on a flat, level surface.
2.1) Align Table Top(A8) to Leg(B8) as shown above.
2.2) Attach Table Top(A8) to Leg(B8) using Bolts(①) with Allen Key(③) as shown above.
2.3) Attach Table Top(A8) to Leg(B8) using Bolts(②) with Allen Key(③) as shown above.
Tighten the Bolts fully in a sequential manner.
Step 2.1
Step 2.2
Step 2.3
Page 3 OF 4