Installation & Assembly

ManualsBrandsMercury Row ManualsAccent ChairsHeberling 25.5'' Wide Linen Armchair

ASSEMBLY INSTRUCTIONS

Accent Chair

 

 

  





 



  





Summary of content (6 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS Accent Chair Thanks for choosing our product. Please kindly check parts listed below and read this manual carefully, then assemble them step by step. Please feel free to contact us for any questions. 1. If any accessories are missing, please kindly send us messages to let us know the number of missing part regarding to the part list of instructions. We will send replacement to you asap. 2.
PAGE 2
. .� . • � Ii, � �., * Please remove this 4 screws before installation. !_____ 70% ___________ __ --- * Please secure all the screws by 70% before completely level the chair.
PAGE 3
STEP1 * Please remove the armrest from the panel before installation. These screws are not intended for installation. STEP2 -+----: /'. •M8x60mm -2x -�2X -�1X * Uncover the black cloth on bottom of Seat [ B], then connect Seat [ B] and backrest [A] with Screw [ E ] , Flat Washer [ F ] by Allen Wrench [ H ].
PAGE 4
w STEP3 4D J--_____--f :.. . 0 I. I M8x60mm • U.-2x * Connect Left armrest [ C(L) ] to the Seat [ B ] and Backrest [A] with Screw [ E ] and tighten them by 70%. STEP4 M8x60mm ✓• • rni--2x �1X -�1X * Connect Crosspiece [ D] to Left armrest [ C ] (Note: Larger holes outward) with 2PCS Screw [ E ] and tighten them by 70%. Prod the nut In side the Crosspiece [ D] to make sure they are they are aligned before Screwing it.
PAGE 5
STEP5 •M8x60mm oiam-4x * Likewise, assemble the Right Armrest [ C(R) ] with 4PCS Screw [ E ] by Allen Wrench [ H ] and tighten them by 70%. STEP6 r--- - r ! - -- - ---:-_ � --4D ------ --- --- � --i � � •- .... � n...o...._ -,;" .... � L _ _ .1_00%_______ __ ___ • * Sit on the chair softly (with 70% weight ) on the floor to level the seat. Then tighten all the screws by 100%.
PAGE 6
STEP? * Insert 8PCS Screw Covers [ G] into all Screw Holes . . ...