Should you discover. ly of the following: © A.Cut.damaged, or frayed wire insulation, B.Cracks in the: lamp holders or enclosures, Loose connections or exposed wire, # DONOR PANTHEON TRE: CONTACT THE DEALER WHERE IT WAS PURCHASED L. Before using and prior to each season 5 inspect product carefully, : 2. When not in use store tree in cool. dry, location protected from sunlight. : Temperature not to exceed 100°F, 3. Do not use this tree for other than its Intended use a5 an indoor decoration, 4.
‘REPLACEMENT OF LIGHTS 1. Grasp plug and remove for the receptacle or other outlet device (surge 2. Pull lamp and plastic base straight out of lamp holder. Grasp plastic not glass. 3. Replace lamination with replacement provided with tree. = REPLACEMENT FOF FUSES 1. Grasp plug and remove from receptacle or other outlet'device (surge protector, effete. 2.To expose fuse,slide open fuse access cover on top of plug, toward blades. 3. Remove fuse from holder. 4.
HINGED TREE ASSEMBLY INSTRUCTION HELPFUL HINTS: Please read the instruction completely before you assemble your tree. The model number of your tree was printed on the side of hearthstone. Always use this number to identify your tree if any BRANCHES IN UPRIGHT WILL UNFOLD DOWN AUTOMATICALLY, question arises. Save the carton for storing your tree, Use miniature tree lights. s The stand shown here may differ from the stand which your supplier provided. ASSEMBLY 1. Assemble ~ Insert tree pole into the stand.
TIRE IGE 01 GHATS WU YO WEY te wp ie others. At'the end of the stem, the tips of center branch should be extended straight out. Curve each branch slightly to make the tree have a natural look. 3. Shape the top section ~ Pull down branches of the lowest layer in an even circular pattern and repeat for each fayer till the top branch, Curve ; . POSITION BRANCHES CORRECTLY TO each branch and top branch straight up to a fixed position, THE HINGE JOINT. 4.
Use and Care Instructions a) bj <) Before using or reuse ng, inspect product carefully, Discard any products that have out, damaged, or frayed wire insulation or cords, cracks in the lamplighters or enclosures, {00s contentions, or exposed copper wire. When storing the product, carefully remove the product from wherever it is placed, including tree, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires.
IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: » READ AND FOLLOW ALL SAFETY INSTRUCTIONS. b} Do not use seasonal products outdoors unless marked suitable for flooring and outdoor use. When products are used in outdoor applications, connect the product fo 2 Ground Fault Circuit Interrupting (FANCY) outlet. If one is not provided, contact a qualified electrician for proper installation.
