Place the Metal Side Panel (1) Horizontially , assamble the Shelf (2) for the the top and Shelf (3) after by using Screw (B) and the Wrench (J) Repeat #Step "1" for the other size Panel (1)
Stand up the Shelf and Secure the Cross Bar (A) at the back by using Screw (C) and Wrench (J) for one side. Repeat #Step "3" for the other size.
To ensure the sercurity for the Cross Bar (A), please put Screw (C) and Nut (D) together For better sercruity, Shelf can attached with the Wall by using the Cloth Belt (E), please drill a hole in the Wall which 3cm-5cm higher than the Shelf (2)
Put Plastic (G) into the Drilled hole Put the Cloth Belt (E) on the Wall and secure it by Screw (H) and the Screw Driver
2 Attach the other End of the Cloth Belt (E) under the bottom of Panel (2) by Screw (F) and Screw driver
