Assembly Instruction

3
3
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry
or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all
connections are tight.
M
N
N
Wall
1
*NOTE: WE RECOMMEND THAT YOU ATTACH THE PRODUCT TO YOUR WALL AS
A SAFETY PRECAUTION.
Drill 2 (Two) holes in your wall approximately 2" (Two inches) BELOW the corresponding
positions of Mounting Tabs (M) and insert Plastic Sockets (L) as sown.
*NOTE: You may need to tap LIGHTLY with a rubber mallet.
Attach Mounting Tabs (M) to Plastic mounting straps (N) with Wood Screws (K),
making sure the Tabs extend UPWARD.
Now connect the corresponding Mounting Tabs (M) with Plastic mounting straps (N) and tighten
as desired before locking in place.