Assembly Instructions

I
J
1. Remove all protective packing material and position
base on floor. Attach the seat(I) onto the base(J)
with Alu plate(F) as the picture, then assemble
using bolt(A), flat washers(B),lock washers(C),nuts(D)
and nut cap(E). Be sure the arrows face the front.
2. Tighten all the bolts and nuts. Test the swivel rocker
gently. If the rocker does not rock properly, double
check the assembly procedure.
3.Put Cushion(K) on the unit(as shown in the picture).
Warning : DO NOT use acid or alkaline
washing liquid to clean the product.
K
H: This part have been assembled by
factory already.
Made in China
B
C
A
D
E
DO NOT OVER TIGHTEN
*
NO SOCKET DRIVERS
*
NO POWER TOOLS
*
L