Assembly & Installation Instructions

ManualsBrandsMercury Row ManualsCeiling LightsAntonia 2 - Light 15'' Simple Drum Semi Flush Mount

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Turn off the power at fuse or circuit box

Installation Steps

Canopy

Ball Nut (G)

Fixture

Socket

Coupling

Glass Shade

Bulb Type A Max.60W

(not included)

1. Attach two fixture mounting screws to the mounting

strap, and then secure it with two lock nuts. Adjust the

length of the fixture mounting screws if necessary.

2. Attach the mounting strap to the outlet box using two

mounting screws.

3. Pull out the source wires from the outlet box. Make

wire connections using wire connectors as follows:

---Connect the black wire from the fixture to the black

wire from the power source.

---Connect the white wire from the fixture to the white

wire from the power source.

---Attach the fixture grounding wire to the mounting

strap with the green grounding screw, and then

connect it to the house grounding wire with a wire

connector.

Carefully put the wires back into the outlet box.

4. Attach the canopy to the mounting strap by inserting

the fixture mounting screws, and then secure it with

two ball nuts.

5. Screw the threaded pipe into the coupling, then secure

it with a washer and hex nut.

Note: Depth of threaded pipe may need to be adjusted

to properly fit glass shade,decorative cup and finial.

6. Install 2 x 60W max medium base bulbs (not included)

to the sockets.

7. Slip the glass shade through the threaded pipe and upward the

ceiling pan. Then tighten them with a rubber pad, metal pad and hex nut.

Caution: Do not over tighten, breakage of glass shade could be occurred.

Hardware Package (included):

Green Grounding

Screw (E)

Fixture Mounting

Screw(D)

Mounting Screw (B)

Lock Nut (F)

Ball Nut (G)

Outlet Box

House Grounding Wire

wire connector (C)

Fixture Mounting Screw (D)

Mounting Strap(A)

Green Grounding Screw(E)

Lock Nut(F)

Mounting Screw(B)

Mounting Strap (A)

Threaded Pipe (K)

Hex Nut (J)

Decorative Cup (I)

Finial (H)

Rubber Pad(M)

Threaded Pipe (K)

Decorative Cup (I)

Finial (H)

Hex Nut (J)

Wire Connector (C)

Washer (L)

Metal Pad (N)

Rubber Pad(M)

Metal Pad (N)