Assembly Instructions

Step 2
2.1) Attach Table Top Frame(I) to Leg(J) using Bolts(⑤) with Allen Key(④) as shown
above.
2.2) Attach Table Top Frame(I) to Leg(J) using Bolts(⑥) with Allen Key(④) as pictured.
Do not fully tighten the Bolts.
In a sequential manner, proceed to tighten all Bolts.
DO NOT tighten any Bolt fully and then move on to the next one, this may cause the
frame to warp.
Then, with the assistance from an adult partner, stand the Table upright.
Adjust the Pre-installed Levellers until the Table is level with the ground.
To adjust the Levellers: with the assistance from an adult partner, tilt the Table to rest on
two feet.
Adjust the levellers to the desired height to avoid wobbles.
Step 3
Place the Glass Top(K) on the assembled Table Frame.
Caution: The Glass is Heavy. Two adults are required for lifting and moving it.
Your Table is ready for use.
This Table can only be used on a flat, level surface.
Step 4
2.1
2.2
Page 13 OF 14