Assembly Instructions

In a sequential manner, proceed to tighten all Bolts.
DO NOT tighten any Bolt fully and then move on to the next one, this may cause the
frame to warp.
Then, with the assistance from an adult partner, stand the Chair upright.
Adjust the Pre-installed Levellers until the Chair is level with the ground.
To adjust the Levellers: with the assistance from an adult partner, tilt the Chair to rest on
two feet.
Adjust the levellers to the desired height to avoid wobbles.
Place the Seat Cushion(D) and Back Cushion(E) on the Chair.
Your Chair is ready for use.
This Chair can only be used on a flat and level surface.
Step 3
Step 4
Back Cushion(E)
Seat Cushion(D)
Page 4 OF 14