ASSEMBLY INSTRUCTION SIDE CHAIR
Take the Allen Wrench, and turn the bolts until the legs are secure. DO NOT TIGHTEN COMPLETELY. Stop when you feel you are adding force to tighten the bolt.
Stand chair up on an even surface and check that it is balanced. If there is a slight wobble, apply downward pressure on each corner where a leg is uneven. Keeping pressure in that corner, tighten all bolts. If balanced, apply downward pressure evenly in the center and tighten all bolts. Do not over-tighten beyond hole depth. While the chair legs uneven after assembled, please adjust the adjustable glide to make it balance.
Center Note : Make sure the seat touch the back leg
