Congratulations! You have purchased a stylish piece of our furniture We strives to provide fine furniture products, built with quality materials and hand finished details. Please carefully follow the assembly instructions to ensure your furniture is assembled correctly to provide long lasting enjoyment. Should you experience any missing or damaged parts.do not return to the store, Please visit our website or contact us directly Care: Use a soft, clean cloth that will not scratch the surface when cleaning.
Step 1. Lay Arm Panel (A) down on a flat surface. Attach Back Panel(B) to Arm Panel(A) using the Medium Washer(l), Nut(H), Wrench (J) & Allen Key (K). NOTE: Do not fully tighten bolt until all bolts are in place. Step 2. Attach Seat Panel(C) to Arm Panel(A) and Back Panel (B) using the Long Bolt( G) Washer(l), Nut(H), Wrench (J) & Allen Key (K).
Step 3. Attach Lower Front Panel (D) to Arm Panel (A) using the Long Bolt(G), Washer (I), Nut(H), Allen Key (K}) & Wrench (J), to Seat Panel (C) using Short Bolt (E), Washer (I) & Allen Key (K). gem» X2 & X55 B&H x2 Step 4. Attach Arm Panel (A) to the Assembled Part using Bolt (J) and Allen Key (K) as shown.
Step 5. Screw the Adjustable Levelers (L) into the per-drilled holes, to the desired position,on the bottom of the chair. Step 6. Turn the assembled chair upright on a flat surface, add the Seat and Back Cushions.
Limited Manufacturers Warranty Our products are warranted against defects in material and workmanship for a period of 90 days beginning from the date of sale. Should any parts be missing or defective, we will replace or repair the parts for a period of 90 days from the date of purchase. Should you experience any missing or damaged parts, do not return to the store.
