Installation & Assembly

Step 4 Place plywood on top Step 5 Zip cover to close. Step 6 Screw feet into holes.
Use rubber grips to tighten.
of foam with its two metal hinges
facing up.
Step 7 Dress taller (B) foam with Step 8 Bend foam bolster Step 9 Place top cushion on top
to fit into the slot of its cover.
Zip to close.
of bottom cushion with frame.
zipper facing down. Zip to close.
Step 1 Unroll plastic fi lm
Step 3 Flip and align plywood over the
Step 2 Dress (A) foam in cover
with holes. Place foam zipper
facing down. Leave unzipped.
to release foam cushions.
B
A
A
covered foam with the metal t-nuts
and warning label facing down.
(6) maple feet
(1) plywood frame
(2) covered foam cushions
B
A
(x1)
(x1)
DAYBED FRAME SET-UP INSTRUCTIONS