User guide
6
The maximum time this setting can be used is 2 hours. To
increase the heat, just turn the control knob to the required
level.
Power Boost Setting, P
All of the induction cooking zones have Power Boost
available, activated by turning the control knob clockwise
until [P ] is shown on the hob control display.
Power Boost allows additional power to be made available for
each of the cooking zones. This is useful to bring a large pan
of water to the boil quickly.
The Power Boost function operates for a maximum
of 10minutes on each zone, after which the power is
automatically reduced to setting 9.
When using the Power Boost function, the cooking zones are
linked.
Fig.2-8 shows the hob layout. Zones A and B are linked
together as are zones D and E.
This means that when using zone A on power boost and then
switching zone B to power boost, then the power to zone A
will reduce slightly. The last zone switched to power boost
always takes priority. Zones D and E work in the same way.
This is a built in safety device.
Deactivate the Power Boost function by turning the control
knob to a lower setting.
Overheat Function
This function identies when the temperature of the pan rises
rapidly and works to maintain a safe level of pan temperature.
It should not interfere with normal cooking.
Please remember not to leave the hob unattended.
Care should be taken to not allow your cookware to
boil dry.
A D
B
E
C
A & B linked D & E linked
Fig.2-8