User's Manual

3. Turn the ignition key from RUN/ACC to OFF.
4. Press the power door UNLOCK control three
times.
5. Turn the ignition key from OFF to RUN/ACC. A
horn chirp indicates the enable/disable feature is
entered.
6. Press the power door UNLOCK control one time.
7. Press the power door LOCK control to toggle the
Autolock/Relock state. You will receive a horn chirp
followed by either a long honk, autolock/relock is
enabled, or no honk, autolock/relock is disabled.
8. Turn ignition to OFF.
If autolock/relock has been changed, the horn will
chirp to confirm procedure is complete.
SECURILOCKY PASSIVE ANTI-THEFT SYSTEM
The SecuriLocky passive anti-theft system provides
an advanced level of vehicle theft protection. Your
vehicle’s engine can only be started with the two
special SecuriLocky electronically coded keys
provided with your vehicle. Each time you start your
vehicle, the SecuriLocky key is read by the
SecuriLocky passive anti-theft system. If the
SecuriLocky key identification code matches the
code stored in the SecuriLocky anti-theft system,
the vehicle’s engine is allowed to start. If the
SecuriLocky key identification code does not match
the code stored in the system or if a SecuriLocky
key is not detected (vehicle theft situation), the
vehicle’s engine will not operate.
The SecuriLocky passive anti-theft system is not
compatible with aftermarket remote start systems.
Use of these systems may result in vehicle starting
problems and a loss of security protection. Large
metallic objects or devices such as the Mobil
Speedpassy on the same key ring as your
SecuriLocky key may cause vehicle starting
problems. These objects and devices cannot damage
the SecuriLocky key, but can cause a momentary
Controls and features
66