Specifications

Item Ford part
name
Ford part
number
Ford
specification
Disc brake
caliper rails
Motorcraft
Silicone Brake
Caliper Grease
and Dielectric
Compound
XG-3 ESE-M1C171-A
Constant
velocity joints
Motorcraft CV
Joint Grease
(High Temp.)
XG-2 ESP-M1C207-A
Windshield
washer fluid
Ultra-clear
Windshield
Washer
Concentrate
C9AZ-19550-AC ESR-M17P5-A
1
DO NOT USE Motorcraft Extended Life Engine Coolant VC-2 (CXC-209
in Canada) meeting Ford specification WSS-M97B44D (orange in color).
Refer to Adding engine coolant in this chapter.
2
Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. MERCON and MERCON V are not interchangeable. DO NOT
mix MERCON and MERCON V. Refer to your scheduled maintenance
guide to determine the correct service interval.
ENGINE DATA
Engine 3.3L V6 engine
Cubic inches 200
Required fuel 87 octane
Firing order 1-2-3-4-5-6
Spark plug gap 1.0-1.1 mm (0.039-0.043 inch)
Ignition system
1
Distributor ignition system
Compression ratio 8.9:1
1
This ignition system meets all Canadian Interference-Causing Equipment
standard requirements regulating the impulse electrical field strength of
radio noise.
Maintenance and Specifications
241