Owner`s manual

FEATURES & CONTROLS
31
3. Disengage the tilt support lever, by raising the outboard off the support lever and rotating the lever down.
Lower the outboard.
a
b
ob00336
a - Tilt support lever b - Knob
MANUAL TILTING
If the outboard cannot be tilted using the power trim/tilt switch, the outboard can be manually tilted.
1. Turn out the manual tilt release valve 3 turns (counterclockwise). This allows manual tilting of the outboard.
ob00339
NOTE: The manual tilt release valve must be tightened before operating the outboard to prevent the outboard
from tilting up during reverse operation.
2. Tilt the outboard to the desired position and tighten the manual tilt release valve.
AUXILIARY TILT SWITCH
The auxiliary tilt switch can be used to tilt the outboard up or down using the power trim system.
a
ob00666
a - Auxiliary tilt switch
SHALLOW WATER OPERATION
When operating your boat in shallow water, you can tilt the outboard beyond the maximum trim range to prevent
hitting bottom.