Owner`s manual

MAINTENANCE

3124

a - Transom bracket anode

b - Trim Tab

c - Anode on each side of gearcase

Propeller Replacement ‑ 87.3 mm (3 ‑ 7/16 in.) Diameter Gearcase

WARNING

If the propeller shaft is rotated while the engine is in gear, there is the possibility that the engine will crank over

and start. To prevent this type of accidental engine starting and possible serious injury caused from being struck

by a rotating propeller, always shift outboard to neutral position and remove spark plug leads when you are

servicing the propeller.

1. Shift outboard to neutral (N) position.

ob00351

ob01446

2. Remove the spark plug leads to prevent engine from starting.

ob00375

3. Straighten the bent tabs on the propeller nut retainer.

ob00376