Specifications

To reset the oil monitoring system to 100% after each oil change

[approximately 5,000 miles (8,000 km) or 180 days] perform the

following:

To reset the oil life to 100% with system warnings CHANGE OIL

SOON/OIL CHANGE REQUIRED displayed:

1. Select this function from the

SETUP control for current display

mode.

2. Press and release the RESET

control to display “IF NEW OIL

HOLD RESET”.

3. Press and hold the RESET

control to display OIL LIFE SET TO

100%. Your oil life is now reset.

To set the oil life to 100% without system warnings displayed:

Press SETUP to display “PRESS

RESET FOR SYS CHECK”.

1. Press RESET to start the System

Check which will display “OIL LIFE

XX% RESET IF NEW”.

2. Press and hold the RESET until

“IF NEW OIL HOLD RESET” is

displayed, then release.

2006 Montego (mgo)

Owners Guide (post-2002-fmt)

USA (fus)

Driver Controls