Specifications

MAINTENANCE
80 eng
EVERY 25 HOURS OR EVERY 30 DAYS, WHICHEVER
OCCURS FIRST
• Verify the front and side cowl latches are tight. Tighten them
if necessary.
• Inspect the fuel and oil systems for deterioration or leaks.
• Inspect the hydraulic steering hoses for deterioration or
leaks.
• Inspect the steering link rod fasteners for wear. Lubricate all
of the specified components. Check all attachment hardware
to ensure proper torque.
• Check the level and condition of the gearcase lubricant.
• Check the alternator belt tension.
EVERY 50 HOURS OR ONCE A YEAR, WHICHEVER
OCCURS FIRST
• Lubricate all of the lubrication points listed in the manual.
•
Lubricate the splines on the driveshaft.
1.
• Lubricate the length of driveshaft with Extreme Grease.
Tube
Ref No.
Description Where Used Part No.
Extreme
Grease
Length of driveshaft 8M0071842
• Lubricate the splines on the propeller shaft.
• Drain and replace the gearcase lubricant.
• Inspect all belts, pulleys, and idler pulleys for deterioration.
•
Check the fuel pressure.
1.
• Check the control cable adjustments.
• Inspect the battery.
• Check the corrosion control anodes.
• Check the tightness of all fasteners.
• Check the power trim fluid.
• Use Quicksilver products to remove engine deposits. See
your dealer for an explanation of which products to use.
1. These items should be serviced by an authorized dealer.