Specifications

MAINTENANCE
82 eng
NOTE: Engine can be stopped, or running at idle speed, when
flushing the cooling system. Do not flush engine using a water
system that exceeds 310.26 kPa (45 psi).
1. Remove the plug from fitting in the bottom cowl.
29444
2. Attach a water hose to the fitting. Turn on the water and
flush for 3–5 minutes.
29445
Top Cowl Removal and Installation
REMOVAL
1. Release the front and side cowl latches.
2. Lift the top cowl from the outboard.
29447
INSTALLATION
1. Position the top cowl over the engine.
2. Ensure the bottom rubber seal fits properly and lock the
front and side latches.