Specifications

FEATURES AND CONTROLS

eng 93

The SmartCraft Instrument package will also aid in Engine

Guardian diagnostics. The SmartCraft Instrument package will

display critical engine alarm data and potential problems.

Power Trim and Tilt

The outboard has a trim/tilt control called power trim. This

enables the operator to easily adjust the position of the outboard

by pressing the trim switch. Moving the outboard in closer to the

boat transom is called trimming in or trimming down. Moving the

outboard further away from the boat transom is called trimming

out or trimming up. The term trim generally refers to the

adjustment of the outboard within the first 20° range of travel.

This is the range used while operating the boat on plane. The

term tilt is generally used when referring to adjusting the

outboard further up out of the water. With the engine not running

and the key switch in the "ON" position, the outboard can be

tilted out of the water. At low idle speed (2000 RPM and below),

the outboard can also be tilted up past the trim range to permit

shallow water operation.

a - Trim switch

b - Tilt range of travel

c - Trim range of travel

28920