Specifications

MAINTENANCE
114 eng
When connecting the engine battery, hex nuts must be used to
secure the battery leads to the battery posts. Tighten the hex
nuts to the specified torque.
!
WARNING
Failure to properly secure the battery leads can result in a loss
of power to the Digital Throttle and Shift (DTS) system, leading
to serious injury or death due to loss of boat control. Secure
the battery leads to the battery posts with hex nuts to avoid
loose connections.
Description Nm lb‑in. lb‑ft
Hex nuts 13.5 120
IMPORTANT: Battery cable size and length is critical. Refer to
Battery Cable Size tables or engine installation manual for size
requirements.
The decal needs to be placed on or near the battery box for
future service reference. One 5/16 in. and one 3/8 in. hex nut is
supplied per battery for wing nut replacement. Metric hex nuts
are not supplied.
NOTICE - Verado Engines
USE ONLY AGM BATTERIES!
Verado engines must use an AGM marine
battery that meets minimum ratings listed below.
IMPORTANT:
Battery cable size and length is critical. Refer to
engine installation manual for size requirements.
Place decal on or near battery box for future service
reference. 5/16” and 3/8” hex nuts supplied for
wing nut replacement. Metric hex nuts not supplied.
DO NOT USE
WING NUTS.
13.5Nm
(120 lbs. in.)
USA (SAE)
800 MCA
135 min RC25
International (EN)
1000 CCA
180 Ah
8M0034050
33871