Specifications

MAINTENANCE

eng 131

4. Remove the power trim fill cap. The fill cap only requires 1/4

turn to remove.

a - Tilt support lever

b - Power trim fill cap

c - Tilt support bracket

d - Pedestal

5. The fluid level should be approximately 25 mm (1 in.) from

the top of the fill neck. Add Quicksilver or Mercury Precision

Lubricants Power Trim and Steering Fluid. If not available,

use automotive automatic transmission fluid (ATF).

Tube

Ref No.

Description Where Used Part No.

114

Power Trim

and Steering

Fluid

Power trim system 92-858074K01

6. Reinstall the power trim fill cap. Tighten fill cap 1/4 turn. Cap

will snap in place. Do not tighten beyond this point.

29312