Specifications

MAINTENANCE
132 eng
Checking Power Steering Fluid
Remove power steering cover and fill cap to check fluid level.
The fluid level should be slightly below the bottom of the fill hole.
Use SAE 0W‑30 synthetic power steering fluid, if needed.
a - Power steering cover
b - Fill cap
c - Fill/full level
Tube Ref
No.
Description Where Used Part No.
138
Synthetic Power
Steering Fluid
SAE 0W-30
Power steering system 92-858076K01
Changing Engine Oil
ENGINE OIL CAPACITY
Engine oil capacity is approximately 7.0 liter (7.4 US qt).
PUMP METHOD
IMPORTANT: Tilt the outboard out/up past vertical for
approximately one minute to allow any trapped oil to drain back
to the oil sump.
IMPORTANT: To reduce or prevent oil spillage when removing
the oil filter, make sure that the outboard is upright (not tilted)
and the engine is cold or has not run for at least one hour.
a
b
c
29315