Specifications

STORAGE
142 eng
Tube
Ref No.
Description Where Used Part No.
124
Fuel System
Treatment and
Stabilizer
Fuel tank 92-8M0047932
Protecting External Outboard Components
• Touch up any paint nicks. See your dealer for touch‑up
paint.
• Spray Quicksilver or Mercury Precision Lubricants Corrosion
Guard on external metal surfaces (except corrosion control
anodes).
Tube
Ref No.
Description Where Used Part No.
120
Corrosion
Guard
External metal surfaces 92-802878 55
Protecting Internal Engine Components
IMPORTANT: Refer to Maintenance ‑ Spark Plug Inspection and
Replacement for correct procedure for removing spark plugs.
• Remove pencil coils and spark plugs.
• Spray approximately 30 ml (1 fl oz) of Storage Seal Rust
Inhibitor into each spark plug hole.
Tube
Ref No.
Description Where Used Part No.
119
Storage Seal
Rust Inhibitor
Spark plug holes 92-858081K03
• Actuate key/push button start switch to crank the engine
through one start cycle, which will distribute the storage seal
throughout the cylinders.
• Install spark plugs and pencil coils.
Gearcase
• Drain and refill the gearcase lubricant (refer to Gearcase
Lubrication).