Specifications

FUEL AND OIL
eng 45
IMPORTANT: When operating a Mercury Marine engine on
gasoline containing alcohol, storage of gasoline in the fuel tank
for long periods should be avoided. Long periods of storage,
common to boats, create unique problems. In cars, alcohol‑blend
fuels normally are consumed before they can absorb enough
moisture to cause trouble, but boats often sit idle long enough for
phase separation to take place. In addition, internal corrosion
may take place during storage if alcohol has washed protective
oil films from internal components.
Low Permeation Fuel Hose Requirement
Required for outboards manufactured for sale, sold, or offered
for sale in the United States.
• The Environmental Protection Agency (EPA) requires that
any outboard manufactured after January 1, 2009 must use
low permeation fuel hose for the primary fuel hose
connecting the fuel tank to the outboard.
• Low permeation hose is USCG Type B1‑15 or Type A1‑15,
defined as not exceeding 15/gm²/24 h with CE 10 fuel at
23 °C as specified in SAE J 1527 ‑ marine fuel hose.
EPA Pressurized Portable Fuel Tank
Requirements
The Environmental Protection Agency (EPA) will require portable
fuel systems that are produced after January 1, 2011 for use with
outboard engines to remain fully sealed (pressurized) up to
34.4 kPa (5.0 psi). These tanks may contain the following:
• An air inlet that opens to allow air to enter as the fuel is
drawn out of the tank.
• An air outlet that opens (vents) to the atmosphere if
pressure exceeds 34.4 kPa (5.0 psi).