Owner`s manual

OPERATION
42
ACTIVE
3418
THROTTLE
ONLY
STATION SELECT
Warming up engine
Throttle Only/Station Select Button ‑ This feature allows the boat operator to increase engine RPM for
warm‑up, without shifting the engine into gear.
ACTIVE
3419
THROTTLE
ONLY
STATION SELECT
1. Move the control handle into neutral position.
2. Press and hold the throttle only/station select button while moving the control handle ahead to
the forward detent.
3. Hold in the button until the horn sounds twice and the neutral light starts flashing. The flashing
light indicates that the throttle only is engaged.
4. Advance the control handle to increase engine RPM. Engine RPM is limited to prevent engine
damage.
5. To disengage, return the control handle back to neutral position.
CONSOLE MOUNT - DUAL ENGINE STARTING PROCEDURE
Before starting, read the Pre‑Starting Check List, Special Operating Instructions, and Engine Break‑in
Procedure in the Operation Section.
!
CAUTION
Never start or operate your outboard (even momentarily) without water circulating through all the
cooling water intake holes in the gearcase to prevent damage to the water pump (running dry) or
overheating of the engine.
1. Make sure the cooling water intake is submerged.