Owner`s manual

MAINTENANCE
72
Crankcase Oil Pump 91‑90265A 5
11591
Aids in the removal of engine oil
without draining the crankcase.
DRAIN METHOD
1. Tilt outboard out/up past vertical for approximately one minute to allow trapped oil to drain back
to the oil sump.
2. Place the outboard in a vertical position.
3. Place appropriate container under engine oil sump plug. Drain plug/seal washer is located
beneath the splash plate (port side of outboard).
4. Loosen the drain plug/seal washer. Install the oil drain funnel over the drain plug/seal washer and
slide the tool onto the splash plate.
ob01264
a
b
a - Drain plug/seal washer b - Oil drain funnel
Oil Drain Funnel 91‑892866A01
4993
Diverts draining engine oil from
contacting the anti‑splash and
anti‑cavitation plates.
5. Remove drain plug/seal washer and drain engine oil into container.
6. Reinstall drain plug/seal washer.