Specifications

OUTBOARD INSTALLATION
95
1. Apply marine sealer to shanks of bolts, not the threads.
2. Fasten the outboard with the correct mounting hardware.
Tighten locknuts to the specified torque.
NOTE: For more accurate torque, whenever possible, turn/tighten
the mounting locknuts rather than turn the mounting bolts.
3729
a
b
c
d
e
a - Flat washer (4)
b - 1/2 in. diameter bolt (4)
c - Shank of bolt
d - Flat washer (4)
e - Locknut (4)
Description Nm lb. in. lb. ft.
Outboard mounting locknuts and
bolts
75 55