Specifications

MAINTENANCE
57
Top Cowl Removal and Installation
REMOVAL
1. Pull out the front cowl latch.
28431
2. Lift front of cowl to clear front latch and push toward the rear
to clear rear hooks.
3. Lift top cowl to remove.
INSTALLATION
1. Lower top cowl into position over engine.
2. Move the cowl toward the rear to align rear hooks. After rear
hooks have engaged, move cowl toward front and push down
front of cowl.
3. Push in latch to secure top cowl.
Exterior Care
Your outboard is protected with a durable baked enamel finish.
Clean and wax often using marine cleaners and waxes.
Fuel System
!
WARNING
Fuel is flammable and explosive. Ensure the key switch is off and
the lanyard is positioned so that the engine cannot start. Do not
smoke or allow sources of spark or open flame in the area while
servicing. Keep the work area well ventilated and avoid
prolonged exposure to vapors. Always check for leaks before
attempting to start the engine and wipe up any spilled fuel
immediately.