Specifications

MAINTENANCE
58
Before servicing any part of the fuel system, stop engine and
disconnect the battery. Drain the fuel system completely. Use an
approved container to collect and store fuel. Wipe up any spillage
immediately. Material used to contain spillage must be disposed
of in an approved receptacle. Any fuel system service must be
performed in a well‑ventilated area. Inspect any completed service
work for sign of fuel leakage.
FUEL LINE INSPECTION
Visually inspect the fuel line and primer bulb for cracks, swelling,
leaks, hardness, or other signs of deterioration or damage. If any
of these conditions are found, the fuel line or primer bulb must be
replaced.
WATER SEPARATING FUEL FILTER
NOTE: The warning system will turn on when water in the fuel filter
reaches the full level. See Features & Controls - Warning
System .
The water separating fuel filter removes moisture and also debris
from the fuel. If the filter becomes filled with water, the water can
be removed. If the filter becomes plugged with debris, the filter
must be replaced with a new filter.
28434
1. Remove and replace filter as follows:
a. Turn ignition key switch to "OFF" position.
b. Disconnect wire at bottom of filter.
c. Remove filter by turning the filter clockwise. Tip the filter to
drain fluid in a suitable container.