Specifications

MAINTENANCE
60
Description Nm lb. in. lb. ft.
Special washer head bolt 27 20
Nylon insert locknut "d" 27 20
Nylon insert locknut "c" Tighten until seats, then back off 1/4 turn
Assemble steering link rod to steering cable with two flat washers
and self‑locking nylon insert locknut. Tighten locknut until it seats,
then back nut off 1/4 turn.
Assemble steering link rod to engine with special washer head bolt
and self‑locking nylon insert locknut. First torque bolt, then torque
locknut to specifications.
Fuse Replacement
IMPORTANT: Always carry spare 5 and 20 amp fuses.
The electrical wiring circuits on the outboard are protected from
overload by fuses in the wiring. If a fuse is blown, try to locate and
correct the cause of the overload. If the cause is not found, the fuse
may blow again.