Specifications

FEATURES AND CONTROLS
41
Upon reaching the rev limit, the Guardian System activates the warning
horn. If the operator does not reduce engine speed within five seconds, the
Guardian Systems reduces available engine power.
To reset the Guardian System protection:
1. Completely reduce throttle for two to three seconds.
2. Re‑engage the throttle. If the engine does not respond, repeat step
one.
Power Trim And Tilt
NOTE: Outboard position can be adjusted by pressing trim switch. This
range is used while operating your boat on plane.
a
c
b
or30-1
a - Trim switch
b - Trim range
c - Tilt range
• Pressing (DN): Moves the outboard in closer to the boat transom,
called trimming in or down.
• Pressing (UP): Moves the outboard further away from the boat
transom, called trimming out or up.
• The term trim generally refers to the adjustment of the outboard within
the first 20° range of travel.
• The term tilt generally refers to adjusting the outboard further up out
of the water.
With the engine turned off, the outboard can be tilted out of the water. At
low idle speed, the outboard can also be tilted up past the trim range to
permit, for example, shallow water operation.