Specifications

FEATURES AND CONTROLS
44
Power Tilt Operation (Single‑Ram Systems)
To tilt the outboard, shut off the engine and press the trim/tilt switch or the
auxiliary tilt switch to the up position. The outboard tilts up until the switch
is released or it reaches the maximum tilt position.
The hydraulic system is fully capable of supporting the outboard during
normal tilting operation. However, if trailering the boat in the trim/tilt
position, use an accessory outboard support device.
Power Tilt Operation (Three‑Ram Trim Systems)
To tilt the outboard, shut off the engine and press the trim/tilt switch or the
auxiliary tilt switch (located on the cowl) to the up position. The outboard
tilts up until the switch is released or it reaches the maximum tilt position.
1. Engage the tilt support lever by pushing the metal stop and rotating
the knob to bring the support lever upward.
b
c
a
or33-1
a - Tilt support lever
b - Metal stop
c - Knob
2. Lower the outboard to rest on the tilt support lever.
3. Disengage the tilt support lever by raising the outboard off the support
lever and rotating the lever until it locks. Lower the outboard.