Specifications

MAINTENANCE
73
!
WARNING
Avoid serious injury or death. The end of the steering cable must be fully
retracted into the outboard tilt tube before adding lubricant. Adding
lubricant to the steering cable when fully extended could cause the
steering cable to become hydraulically locked, causing loss of steering
control.
4833
95
9
5
95
Tube Ref. No. Description Where Used Part Number
95
2‑4‑C with Teflon
Steering Cable and Grease
Fitting on Belt Tensioner
Pulley
92‑802859A1
Light weight oil Steering Cable Obtain Locally
Checking Power Trim Fluid (Single‑Ram Trim
Systems)
1. Place outboard in the full down/in position.
or52
2. Check the fluid level in the trim pump reservoir. The level should be
between the "MIN" and "MAX" level marks on the reservoir.