Service manual

90-898303

3-25

Single Pulse Test

1) From the INJECTOR TEST MENU screen, press 2. The SINGLE PULSE

TEST screen will appear. The cursor will be positioned in the On-Time

(MS) field.

2) Use the υ and ∀ keys to adjust the time up or down. This will be the time

the injector is to be ON during the test. The number must be between 0

and 1000 milliseconds.

3) 3. Use the = and Ο keys to move the cursor to the Adj-Increment field.

4) Use the υ and ∀ keys to set the adjustment. For example, a setting of

“100” would allow adjustment of the On-Time in 100 millisecond

increments.

5) Press ENTER to start the test.

To perform the test again, repeat this procedure beginning with step 3.

Notes

_______________________