Specifications

STORAGE
90-860168040 JANUARY 2004 Page 95
3. Pull T-handle until the hose guide is in contact with the quick connect fittings.
76243
a
b
a-T-handle
b-Hose guide
4. Push down on T-handle to force the blue drain hoses below their connection points to
the block.
5. Ensure water is draining from both blue drain hoses. If water is not draining from one
or both blue drain hoses, go to Clearing Clogged Blue Drain Hoses.
6. Leave blue drain hoses disconnected until all water has drained from engine.
7. Pull T-handle until the quick connect fittings on the blue drain hoses are within reach.
8. Install quick connect fittings on the bracket. Pull on the blue drain hoses to ensure they
are firmly connected.
9. Push down on handle and move into the slot on the bracket.
10. Turn off bilge pump.
IMPORTANT: The next time the engine is started, visually inspect that the blue drain
hoses are connected and not leaking.