Specifications

ON THE WATER
90-860168040 JANUARY 2004 Page 35
0028.05
OPERATION CHART
Operation Chart
BEFORE
STARTING
AFTER STARTING
WHILE
UNDERWAY
AFTER STOPPING
Install bilge drain
plug.
Observe all gauges
to check condition
of engine. If not
normal, stop engine.
Observe all gauges
to check condition
of engine. If not
normal, stop engine.
Turn ignition key to
OFF position.
Open engine hatch.
Check for fuel, oil,
water, fluid and
exhaust leaks.
Listen for the audio
alarm.
Turn battery switch
to OFF position.
Turn battery switch
ON.
Check shift and
throttle control
operation.
Close fuel shut off
valve.
Operate bilge
blowers.
Check steering
operation.
Open fuel shut off
valve.
Flush cooling
system if in
saltwater.
Close the drain
system.
Drain bilge.
Place sterndrive unit
in full DOWN/IN
position.
Perform all other
checks specified by
your dealer and/or
boat builder.
Listen for Audio
Warning Alarm to
sound when the
ignition switch is in
the ON position.