Specifications

MAINTENANCE
90-860168040 JANUARY 2004 Page 63
0065
Changing Oil and Filter
Refer to the Maintenance schedule for the change interval. Engine oil should be changed
before placing the boat in storage.
IMPORTANT: Change engine oil when the engine is warm from operation. Warm oil
flows more freely, carrying away more impurities. Use only recommended engine oil
(refer to Specifications).
0066
QUICK DRAIN OIL
1. Remove the bilge drain plug.
2. Pull tether through the bilge drain.
3. Place the oil drain hose in a suitable container.
4. Remove the drain plug from the oil drain hose.
5. After oil has drained completely, install the drain plug in the oil drain hose.
6. Push the hose through bilge drain and install the plug.
7. Proceed to ALL MODELS.
0067.01
ENGINE OIL PUMP
1. Loosen the oil filter to vent the system.
2. Remove the dipstick.
3. Install the oil pump onto the dipstick tube.
70571
a
b
c
a-Typical oil pump
b-Dipstick tube
c-Oil drain hose
4. Insert the hose end of the crankcase oil pump onto an appropriate container and, using
the handle, pump until the crankcase is empty.
5. Remove the pump.
6. Install the dipstick.
7. Proceed to ALL MODELS.