Specifications

MAINTENANCE
Page 64 90-860168040 JANUARY 2004
0068.10
ALL MODELS
1. Remove and discard oil filter.
2. Coat sealing ring on new filter with engine oil and install the filter.
3. Tighten oil filter securely (following filter manufacturer’s instructions). Do not
overtighten.
4. Remove oil fill cap.
IMPORTANT: Always use dipstick to determine exactly how much oil is required.
IMPORTANT: Add the specified engine oil to bring the level up to, but not over, the
FULL or “OK RANGE” mark on the dipstick.
5. Add recommended engine oil to bring level up to the bottom of the “OK RANGE” on the
dipstick.
6. With the boat at rest in the water, check the oil level and add specified fluid to bring the
oil level up to, but not over, the FULL or “OK RANGE.”
NOTE: Adding 0.95 liters (1 quart) of engine oil will raise the level from the “ADD” mark to
the top of the “OK RANGE.”
Engine model
Capacity
liters
(U.S. qts)
Fluid type Part number
3.0 liter (181 cid) 3.8 (4)
MerCruiser 4-cycle 25W40
Engine Oil
92-802837A1
Always use dipstick to determine exact quantity of oil or fluid required.
7. Start engine and check for leaks.